GRBL1.1 32-Bit Type-C Control Board for Laser Engraving Machine Two Axis Integrated Driver, Offline Controller(B)

This control board is a 32-bit MCU control board, which runs faster, the maximum no-load speed reaches 40000mm/min, the algorithm is optimized better, the vibration is smaller when the machine moves at high speed, and the performance is more stable;
Using the Type-C USB interface, it is more convenient to use and the data transmission is more stable;
One-piece integrated drive
PWM output frequency 10kHz, higher engraving precision and clearer details
Y-axis dual drive, stronger drive capability;

Support USB automatic identification, when plugged in USB and connected to the computer, the offline interface is automatically shielded to avoid offline interference with data;
5V power output port, and software controllable, easy to expand various functions;
Support USB flash firmware, firmware upgrade is more convenient;
XY limit switch interface each
Self-contained laser anti-burn mode, laser S value ≥100, after the laser is turned on, if there is no movement within 5S, an alarm will occur
Material: plastic + metal
Color as shown

Package Contents:
1 x Control Board
1 x Type-C Cable
1 x 1.8 Inch Offline

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.