Mini Stove Fan Heat Powered Firep Fan Log Wood er Eco-fan Quiet 3-6 Firep Fan Home Winter Warm Heat Distribution

Feature:

1. Helps to improve the faster ciration and ciration of the heat energy emitted by the firep.

2. Helps distribute hot air more evenly throughout the room.

3. Accelerate the rise of hot air and the descent of cold air, so that the room temperature is uniform and comfortable.

4. B, s-generating, no battery or electricity required, low temperature start, save , enjoy the heat faster from the stove.

5. S-start, adjust speed and stop.

6. Simple and stylish design, simple wind s can drive large hot wind.

Specification:

Item model number: DY223A DY224A DY225A DY226A

Operating temperature range: 122°F~662°F 50°C~350°C

Air volume range: 160-220

Wind speed range: 1000-1600rpm

Noise: ≤25db

Product Description:

【Working prince】The module in the firep fan acts as a small to drive the fan's motor, so the drive/operation of the firep fan does not require batteries or electricity. The firep fan is pd on the mantel and uses the temperature/thermal energy on the mantel to generate electricity to drive the firep fan. The rotation speed of the fan varies depending on the combustion temperature in the mantel. The higher the furnace temperature, the faster the speed. When the furnace temperature is so low that the fire goes out, the fan speed of the firep slows down until it stops rotating. Normal operating temperature 50°C to 350°C.

【Product structure】Aluminum heat sink, module, bimetal heat conduction sheet, fan .

【Environmental protection and energy saving】High temperature s-power generation The improved hot air ciration can bring greater comfort and use about 28% less wood for the stove.

【Safety Design】The bracket and base of the firep fan are treated with anodized aluminum, which is resistant to high temperature up to 752°F 400°C, and will not deform or discolor even if it works for a time at high temperature.

【Longer service life】The fan base is equipped with a bi-metal safety device, if the surface temperature exceeds 250°C, the safety device wilently lift the front of the fan to protect the TEG and motor.