LILYGO® TTGO Meshtastic T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth ESP32 GPS

LILYGO® TTGO Meshtastic T-Beam V1.1 ESP32 433/868/915/923Mhz WiFi Bluetooth ESP32 GPS NEO-6M SMA 18650 Battery Holder With OLED

Product Demonstration （ Note:OLED is not soldered to T-BEAM）

Product Features

ESP32 Lastest ESP32 Version: REV1 WIFI Bluetooth 8MB PSRAM 4MB Flash 3D LORA Product Description Working voltage: 1.8~3.7v Acceptable current：10~14mA Transmit current: 120mA@+20dBm 90mA@+17dBm 29mA@+13dBm Operating frequency: 433/470MHz(433HMz version) /868M/915M(868MHz version) Transmit power: +20dBm Receive sensitivity :-139dBm@LoRa &62.5Khz&SF=12&146bps -136dBm@LoRa &125Khz&SF=12&293bps -118dBm@LoRa &125Khz&SF=6&9380bps -123dBm@FSK&5Khz&1.2Kbps Frequency error：+/-15KHz FIFO space ：64Byte Data rate ：1.2K~300Kbps@FSK 0.018K~37.5Kbps@LoRa Modulation Mode ：FSK,GFSK,MSK,GMSK,LoRa TM，OOK Interface form ： Sleep current ：0.2uA@SLEEP 1.5uA@IDLE Operating temperature ：-40℃- +85℃ Digital RSSI function Automatic frequency correction Automatic gain control Low voltage detection Fast wake-up and frequency hopping Highly configurable data packet handler GPS GPS modules NEO-6M, 3V-5V power supply Universal Destined module with ceramic , signal super Save the configuration parameter data Down With data backup battery There are LED signal indicator Default Baud Rate: 9600 Power Power Supply InputUSB 5V/1A Charging current500mA Battery Input 3.7-4.2V Charge ICAXP192 OLED Description: 1.Size:  0.96 inch 2.High resolution: 128 * 64 3.Color:   4.Viewing angle:  > 160 ° 5.Driver IC:  SSD1306 6.Working temperature:  -30  celcius ~ 80  celcius 7.Module volume (generous):  27.0MM * 27.0MM * 4.1MM 8.Supports many control :  Fully compatible with Arduino, 51 series, MSP430 series,STM32/2, CSR , etc. (a lot of routines for reference) 9.Wide voltage support: without any modification, directly supports 3.3V ~ 5V DC 10.Ultra-low power consumption: Normal operation Is 0.04W 11.IO port occupies minimal display: The IIC communication,as long as the two IO ports LORA connector is RG316

More information:

https://github.com/geeksville/Meshtastic-Android/blob/master/README.md

https://github.com/meshtastic/Meshtastic-device/releases

https://github.com/Xinyuan-LilyGO/LilyGO-T-Beam

Pin Schematic

Size picture

Shipping List 433MHz/868MHz Version 1 X TTGO T-Beam 1 X 433MHz/868MHz 1 X 0.96 inch 128X64  OLED 2 X Pin Note: OLED is not soldered to T-BEAM

915MHz/923MHz Version 1 X TTGO T-Beam 1 X 915MHz/923MHz  1 X 0.96 inch 128X64 OLED 2 X Pin Note:OLED is not soldered to T-BEAM window.adminAccountId=226326086;

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.