Ender 3 Dual Z Axis Upgrade Kits For Creality Ender 3 Pro, Ender 3 V2, Voxelab Aquila, With Lead Screw 42-34 Stepper Motor

Package includes:

1 PC 42-34 Stepper Motor

2 PCS Lead Screw Bearing Guide

1 Set Power Supply Holder

1 PC Coupler

1 PC Z Axis Lead Screw Bracket

1 PC Dual Z Stepper Cable

1 PC Z Motor Bracket with screws and t-nuts

1 PC 365mm T8 Lead Screw

1 Set Matching all screws and tools

Installation Step:

1) Turn off the printer, unplug the power cord, then use a hexagonal wrench to loosen the two screws that fix the power supply, and then remove the power supply.

2) Install the coupler on the stepper motor and tighten the screws. Use hexagon socket screws and Z-axis motor bracket to fix the motor on the aluminum profile.

3) Remove all screws of the sheet metal pulley on the right side of the X axis.

4) Fix the Z-axis sheet metal with long screws and install it on the right-hand sheet metal of the X-axis. Screw the T8 screw into the nut of the coupler and tighten the screw of the coupler.

5) Install dual Z stepper cable to the motherboard, and connect two Z motors.

6) Install the Phillips screw and the boat nut on the power supply holder to install the power supply.

7) Place the lead screw bearing guide on the left and right sides of the X-axis aluminum profile and let the Z-axis rise to the highest position. If one side is uneven,turn the corresponding coupler clockwise.

8) Install the lead screw bearing guide and tighten the screws, paying attention to the alignment position of the mounting base.

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.