Coffee hine Repair Tool Oval Head Screws With ic Screw Pin Jura Special Bit Screwdriver Removal Service

Coffee hine Repair Tool Oval Head Screws With ic Screw Pin Jura Special Bit Screwdriver Removal Service

Descrtion:

Made of Marine Grade 316 Stainle Steel, very tough and resistant to corrosion

A special bit key to remove the screws on the back wall of coffee hines

Ex long (2.4 inch)

ic (custom added)

The key ring moves freely and immediately applicable or can easily be removed so that you can

a regular driver handle acce in the tightest ps.

ditionally the screws are obvious and appear as black "rivets". However, on many of the more recent models Jura has the screws which es it le obvious how to disaemble the

hines. You may find this additional info helpful:

J-series, Z-series, and X5: There are two screws behind the Jura logo in the back.

Turn the logo an eight of a turn clockwise (Z-series/X5) or counter-clockwise (J-series) to release it and you will find the screws.

ENA-series: These hines are secured with a locking mechanism. There is a screw behind the Jura logo in the back. Turn the logo to counter-clockwise release it and you will find the screw. Remove the screw and then push the gray plate upwards to release the locking

mechanism in the back. Likewise, there's another oval head screw in the front that will be visible when you pull out the y. The locking mechanism in the front needs to be pulled down (in const to the in the rear that moves upwards)

Fit for Jura, Capreo, Krups, Franke, AEG ,Orchestro, Siciliana, Toscana, and all Nespreo

hines

The bit will fit the proprietary oval head screws in the following hines:

Jura-Capreo: A1, A5, A7, A9, C5, C50, C55, C65, C70, C75, C9, C90, D6, E5, E8, E9, E10, E25,E30, E40, E45, E50, E55, E6, E60, E65, E70, E74, E75, E80, E85, ENA3, ENA4, ENA5, ENA7,ENA9, ENA Micro 1, ENA Micro 5, ENA Micro 8, ENA Micro 9, ENA Micro 90, ENA Micro Easy, F5,F50, F60, F70, F90, F7, F9, F900, Giga 5, Giga X3, Giga X7, Giga X8, Giga X9, XF50, XF70, S50,S55, S70, S75, 5, 0, 5, S7, , , J5, J6, J9, Z5*, Z6*, Z7*, Z8*, Z9*, X5*, X6*, X7,X9, X30, X70, X90, X95, Ul, Cappuccinatore, 0, Scala, Scala Vario, Evolution, 201, 300,401, 500, 601, 801, 2000, 3000, 4000, 5000, 6000

Capreo: C1000, C1300, C1500, C2000, C3000

AEG Cafamosa: CF 80, CF 81, CF 85, CF 90, CF95, CF 100, CF 120, CF 200, CF 300, CF 400,CF 500

Krups: Orchestro, Siciliana, Toscana, and all Nespreo hines.

Franke: Saphira

In short, it will fit all Jura-hines. We don't know of any Jura hine that it does not fit. As for other brands, please check list above or contact us.

Please beware that the tool does not fit the 5.8x4.8mm oval head bolts found in Krups dr coffee

Specifications:

Specification:

Net weight:16g

Size:6.1*3.3*1（cm）

Color:Sier

Material: stainle steel

Package Included:

1*Coffee hine screw