5pcs Essential Presser Foot For Domestic Sewing Machine

This set is the basic presser foot for domestic sewing machine (low shank electric domestic sewing machine) commonly known as TABLE TOP MACHINES. They are mostly fitted on domestic sewing machine with removable snap on adapter. These machines include New Home, Janome, Brother, Victoria, Singer, Juki, Pfaff, Riccar, Victoria, Butterfly etc.and other low shank domestic sewing machines
FEATURE:
Shirring/Gathering foot

• The gathering foot is fitted with a slid - in groove that fits into your sewing machine shank. To install the presser foot, kindly unscrew and remove the snap-on adapter on your machine and insert the gathering presser foot after which you screw the foot to the shank.
• The foot has an additional groove towards the base of the foot. The function is to enable you sew and gather at the same time. You have to insert one fabric in the groove and the second fabric (to be gathered) at the bottom.
• To achieve good result, kindly increase your tension (depending on your machine) up to few numbers before the highest.
• While sewing, remember to put your fingers behind the foot and try to push back the fabric towards the foot as you sew. This will allow thicker gathering

ZIPPER FOOT

• Zipper foot for all snap on domestic sewing machines. Suitable for Brothers, Juki, Janome, Singer, New Home, Pfaff, Riccar, Victoria etc.
• The foot is fitted with left and right snap on pins which allows you change the position and direction of zipper without turning your fabric around. 
• It allows for easy alternation between left and right zipper coils without turning the fabric around.

FOUR STEP BUTTONHOLE FOOT

• This presser foot is referred to as the FOUR step button hole presser foot.
• It is suitable for all sewing machines with zig zag functions, and with snap on adapter attached to the machine. It is most suitable for sewing machines with button hole features.
• attach the presser foot to the machine using the snap on adapter on your machine.
• mark the length of the button hole on the fabric.
• Mark out another button hole on scrap fabric for a test.
• Adjust your stitch dial to zig zag or button hole stitch on the machine.
• Depending on the instruction in the machine manual, start stitching from the left, then the front, the right and the bottom
• you can run it twice if you desire.

INVISIBLE ZIPPER FOOT

• The invisible Zipper foot is for all snap on domestic sewing machines. 
• It is applicable and can be used on all low shank domestic sewing machines with snap on adapter.
• The foot is fitted with left and right zipper grooves which allows you feed your invisible zipper teeth for the right and left side. It allows for easy alternation between left and right zipper coils without turning the fabric around.
• It is a fine presser foot replacement for broken presser foot or to improve your sewing machine.
• The invisible zipper foot is fitted with 2 grooves that allows you feed the invisible zipper teeth into the a groove at a time and it is also fitted with zipper teeth guide to guide the zipper teeth while sewing. 
• For the first timers, kindly practice with the presser feet before using it for your project to enable you master its operations.

OVERCAST PRESSER FOOT

• If your sewing machine has zig zag feature and overcast stitch on it, this presser foot allows you use the zig zag and overcast stitch function to perform overcast at the edge of your project to avoid fabric fraying. It is a domestic way of overlocking fabric edges.