17Hs081004S 4Lead Nema 17 Stepper Motor 20Mm 1A 13Ncm18.4Oz.In 42 Motor Nema17 Stepper For Diy 3D Printer Cnc Xyz

Short Height
13Ncm(18.4oz.in) holding torque
FOR NEMA 17 bipolar 1.65 inchx1.65 inchx0.79 inch 4-wire
1.8 deg. step angle(200 steps/rev)
Rated current 1.0A & resistance 3.5ohms
This is Short Height FOR Bipolar Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution).
Each phase draws current 1A, allowing for a holding torque of 13Ncm(18.4oz.in).
Color: silver
material: metal
Electrical Specification:
Manufacturer Part Number: 17HS08-1004S
Motor Type: Bipolar Stepper
Step Angle: 1.8 deg.
Holding Torque: 13Ncm(18.4oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 3.5ohms
Inductance: 4.5mH+/-20%(1KHz)
Physical Specification:
Frame Size: 42 x 42mm
Body Length: 20mm
Shaft Diameter: 5mm
Shaft Length: 20mm
D-cut Length: 16.5mm
Number of Leads: 4
Lead Length: 400mm
Weight: 140g
Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
Package Contents:1* stepper motor
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.