10S 36V 35A Li-Ion Lipolymer Battery Protection Board Bms Pcb For E-Bike Electric Scooter

10S LI-ION BATTERIES. The protection board is for 10 series cell Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries
35A DISCHARGE CURRENT. Charging connector and discharging connector are separated, discharging current is 35A
STABLE PROTECTIVE FUNCTIONS. Multiple protective functions including overcharge protection, overdischarge protection and short circuit protection
Color: Silver + Green
Material: metal + PCB
PROLONG THE SERVIEC TIME. Help prolong the service time of your battery pack
Discharge Continuous Discharge Current 35A
Momentary Discharge Current 100A
Charge Charge Voltage 42V
Charge Current 8A(Max.)
Overcharge Protection Overcharge Detection Voltage 4.28±0.05V
Overcharge Protection Delay 100mS
Overcharge Cancel Voltage 4.08±0.05V
Over-discharge Protection Over-discharge Detection Voltage 2.55±0.08V
Over-discharge Detection Delay 50mS
Over-discharge Cancel Voltage 3.0±0.1V
Overcurrent Protection Overcurrent Detection Voltage 150mV
Overcurrent Detection Delay 15mS
Overcurrent Protection Current 120±5A
Protection Cancel Condition Disconnect Load
Short Circuit Protection Short Circuit Protection Condition Outside Load Short Circuit
Short Circuit Detection Delay 200uS
Protection Cancel Condition Disconnect Load Internal Resistance
Main Circuit Conduction Internal Resistance ≤15mΩ
Self Power Consumption Working Current ≤50uA
Sleeping Current(Battery Over-discharge) ≤10uA
Operating Temperature -30℃~+80℃
Size 69x51.5x10mm/2.71x2.02x0.39 inch

Package Contents: 1pc x 10S 35A Lithium Battery BMS PCB
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.