Bside Z1 Multimeter LCD Digital Tester Smart Pen Type

This is a multimeter, which has automatic identification design make it very easy to use. Connect the test lead to the voltage and resistance, meter automatically measure AC / voltage, resistance and continuity.



Features:

1. Dual Mode: Multimeter supports auto mode and manual mode. Press the button for 1 second to enter auto mode, which can automatically measure AC / voltage, resistance and continuity.

2. Bright LED Flashlight: LED flashlight lets you test efficiently and comfortably anywhere, indoors and outdoors, day and night.

3. Live / Neutral Wire Check: Safe and easy to distinguish the live / neutral wire by comparing the strength of the detected voltage, the wire that detect the stronger voltage signal is live wire.

4. LCD Display: Greatly enhance the reading experience, the lighted up numbers and letters make it very easy to read, even in bright sunlight or poor light.

5. High Efficiency: Single test lead design make the measurement more efficient, especially for electronic components maintenance. You no longer have to worry about the tip of the test lead moving while reading the test results.



Note:

1. When measuring high voltage, be careful to avoid electric shock.

2. Do not input AC or voltage higher than 500V, it may destory the meter.

3. Disconnect the test leads from the circuit when completed measurement.

4. Production compliance is 600V, and the maximum range is 500V.

5. Due to manual measurement, the size may be slightly different. Thank you for your understanding.

6. Due to different light conditions and different monitors, item color displayed in photos may be showing slightly different from real object.



Specifications:

Brand: BSIDE

Model: Z1

Color: Black

Shell Material: ABS

Display: LCD

Maximum Display Value: 2000 Digits

Polarity Indication: Self-indicating, '-' means negative polarity

Over-range Display: 'OL' or '-OL'

Sampling Time: The meter figures show about 0.4 seconds

Automatic Off Time: 5 minutes

Battery Low Voltage Indication: LCD display symbol

Operational Temperature And Humidity: 0~40℃, 0~80% RH

Storage Temperature And Humidity: -10~60℃ , 0~70%RH

Battery: 1.5V AAA x 2 ( Not Included )

Automatic Range: YES

Full Measuring Range Overload Protection: YES

Continuity: YES ( If the resistance < 50Ω，the sounds )

V-Alert (NCV): YES

Live / Neutral Wire Check: YES

Flashlight: YES

Auto Mode: Automatic identification of AC voltage, voltage, resistance

Operating Altitude: ≤ 2000m

Multimeter Size: 2.25 * 2.2 * 18.8cm / 0.89 * 0.87 * 7.40in (L*W*H)

Packing Size: 6.5 * 3.3 * 19.5cm / 2.56 * 1.30 * 7.68in (L*W*H)

Multimeter Weight: 52g / 1.83oz ( without battery）

Gross Weight: 120g / 4.23oz


Function Range Resolution Accuracy Input Impedance Maximum Input Voltage Red Backlight Alert Voltage 0V~500V ( Mode) 0.5V~500V (Auto Mode) 0.01V ±（0.8% + 3 counts） 1MQ 500V & AC (RMS) >90V AC Voltage 0V~500V (AC Mode) 0.8V~500V (Auto Mode) 0.01V ±（1.2% + 5 counts） 1MQ 500V >90V Resistance 0Ω~2MΩ 1Ω ±（1.2% + 3 counts） / / / Frequency 40Hz~1000Hz (0~30VAC) 40Hz~400Hz (0~500VAC) 0.1Hz ±（2.0% + 10 counts） / / /
























Package List:

1 * Multimeter ( Without Battery )

1 * Test Lead

1 * Screwdriver

1 * Instruction Manual ( Chinese & English )