Ascent ET-60 ET-60II ET-63 ET-65B ES-62 ES-68 ES-68II camera Lens Hood for canon lens camera

Product Description

ET-60:

Description :

High quality bayonet mount dedicated replacement lens hood ET-60 made specifically to match the focallength of compatible lenses with black matte inner surface designed to reduce the light's glarePrevent glare by stopping light from coming into the lens at side anglesImproves contrast and image qualityProtects lens from scratches and impactsYou can use lens cap and filter with the hood on a lensCan be installed in reverse position to save space when not needed

Compatible With:

EF 75-300mm f/4-5.6EF 75-300mm f/4-5.6 II USMEF 75-300mm f/4-5.6 IIEF 75-300mm f/4-5.6 III USMEF 75-300mm f/4-5.6 IIIEF 90-300mm f/4.5-5.6 USMEF 90-300mm f/4.5-5.6EF-S 55-250mm f/4-5.6 IS

ET-60II:

Description :

High quality bayonet mount dedicated replacement lens hood ET-60 made specifically to match the focallength of compatible lenses with black matte inner surface designed to reduce the light's glarePrevent glare by stopping light from coming into the lens at side anglesImproves contrast and image qualityProtects lens from scratches and impactsYou can use lens cap and filter with the hood on a lensCan be installed in reverse position to save space when not needed

Compatible With:

EF 75-300mm f/4-5.6EF 75-300mm f/4-5.6 II USMEF 75-300mm f/4-5.6 IIEF 75-300mm f/4-5.6 III USMEF 75-300mm f/4-5.6 IIIEF 90-300mm f/4.5-5.6 USMEF 90-300mm f/4.5-5.6EF-S 55-250mm f/4-5.6 IS

ET-63:

DescriptionMaterial: ABS（envmental protection）Color: BlackSize:61.5mm*85mmType: ET-63Interface Type: Bayonet mount designFeatures* Internal use of anti-reflective matte proce, support for reverse installationEasy to carry and collections* Shelter side interference light source，reduce halos and enhance photo color and saturation* Since the end of the lens is extended, which will make some extra protection from accidental impact lens hoods block side glare，and augment the protection provided by filters to the lens surface and ring* Can firmly on the lensCompatible With :For Canon 55-250mm EF-S 55-250mm f/4-5.6 IS For STM lens

ET-65B:

Features

The lens hood provides a cost-effective solution to the probl caused by sun glare rain and wind-blown debris and is also valuable in providing protection against knocks and damage.In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impactLens hoods block side glare and augment the protection provided by filters to the lens surface and ringThe design makes it firmly on the lensBayonet mount designHood material: plasticHood color: Black

Description:

* Place of Origin: Guangdong China (Mainland)* Material: Plastic* Color: Black

Suitable For

EF 70-300mm f/4-5.6 IS USM 58mmEF 70-300mm f/4-5.6 DO IS USM 58mmES-62:Product Description

Introduction & Features:1. Improve quality and contrast of your photographs with this lens hood.2. Also allows to protect your lens against shocks.3. An acceory eential to the photographer.

Specification:

Material: ABSColor: Black

Suitable For:for Can&n EF 50mm f/1.8 II

ES-68:

Features:

Product Highlights

Blocks stray light from entering the lens

Reversible for easy storage

Will not affect the use of lens cap or filter

Non-glare matte finish prevents reflections

No vignetting will be caused with the hood on

Extra protection from accidental impact

Compatible with:CAN0N-E0S EF 50mm f/1.8 STM onlyES-68II:

Features:

Product Highlights

Blocks stray light from entering the lens

Reversible for easy storage

Will not affect the use of lens cap or filter

Non-glare matte finish prevents reflections

No vignetting will be caused with the hood on

Extra protection from accidental impact

Compatible with:CAN0N-E0S EF 50mm f/1.8 STM only